995011: 1 Door Access Module
The 1 Door Access Module is connected directly to the Concept 485 LAN. Up to 99 of the 1 Door Access modules may be installed in a single panel system.



The Single Door Access Module is designed to provide an interface for a single Reader head along with the required inputs and outputs for the control and monitoring of a single door.
The module is supplied as a PCB only and may be incorporated into any suitable existing enclosure with perhaps another LAN module or an optional external power supply.

Simple programming options allow Door Access Control to be integrated with Area On/Off Control where required. Access Control processing utilises the Door contacts and/or Tongue Sense inputs to provide "Door Forced" and "Door Open Too Long" alarms. Economical single door and single card reader access option.
- On-board lock relay.
- Inputs for monitoring of Door status.
- Compatible with 5 Volt or 12 Volt Readers (Selectable)
- Up to 15 "Backup Cards" may be programmed to provide standalone operation in the event of loss of communication with Control Module. (Higher numbers available upon request)
- Valid / Invalid Multi-flash indication output.
- Separate Tamper connection.
- On-board diagnostic LEDs assist with troubleshooting.
- Fuse protection of Reader head power isolates module and lock operation in the event of Reader head failure or damage.
- Request to Enter (REN) OR Request to Exit (REX) input provided.
- Operates with all common Magnetic swipe and Wiegand readers without the need for any additional interface (Software selectable).
- Arm on Exit input provided.
- On-board booster for remote 12V Reader heads.