Products
Sisteme conventionale

Conventional Fire Alarm & Extinguishing System

Fighter System Configuration: The Fighter panel is an advanced multipurpose Menu Driven analogue conventional fire alarm panel, designed for medium and large facilities. It is expandable by means of modules that interconnect with 4 wire bus system. This allows the panel to be expanded up to 72 fire alarm zones, 72 relays and 8 keyboards (on panel or stand alone keyboard). It can also be used for fire extinguishing applications. Up to 16 PSUs can be used depending on the installation requirements.

The panel is fully customizable via a user interface from the keyboards. All parameters are displayed with hierarchical menus in 3 different access levels in an easy to understand and use manner. The system general status can be easily viewed at a glance from the led indicators on the keypads and the user can retrieve more information from the LCD character display and perform actions using the keyboard. The system is also equipped with a PSTN encoder for events reporting to a Monitoring Station.

The specially designed ProVision software allows the end user(s) to monitor, program and control the system. The software is capable to communicate with the panel via FRS-232 module for local connection or FRTCP-IP module for distant connection.

Schema - produse Sistem Fighter

Fighter MP splash

Fighter MP

8 zones conventional fire alarm panel
• Expandability up to 72 zones using expansion modules (8 zones per module).
• Output expandability; up to 8 relay modules with 8 relays each.
• Up to a maximum of 8 keypads units per system.
• Built in communicator supporting Contact I.D protocol.
• Power supply 27.6 VDC, 2A.
• CE certified.
more
Fighter MPR

Fighter MPR

8 zones and 8 relays conventional fire alarm & extinguishing panel
Expandability up to 72 zones using expansion modules (8 zones per module). Output expandability; 8 relay modules with 8 relays each. Up to a maximum of 8 keypads units per system. Built in communicator supporting Contact I.D protocol. Power supply 27.6 VDC, 2A. CE certified.
more
Fighter KZPS

Fighter KZPS

8 zones expansion panel with keypad and PSU
Connects to the fighter panel via 4-wires RS-485 BUS. Module ID via Dip Switches. Power supply 27.6 VDC, 2A. CE certified.
more
Fighter KRPS

Fighter KRPS

8 relays expansion panel with keypad and PSU
Connects to the fighter panel via 4-wires RS-485 BUS. Module ID via Dip Switches. Power supply 27.6 VDC, 2A. CE certified.
more
Fighter KZRPS

Fighter KZRPS

8 zones and 8 relays expansion panel with keypad and PSU
Connects to the fighter panel via 4-wires RS-485 BUS. Module ID via Dip Switches. Power supply 27.6 VDC, 2A. CE certified
more
Fighter ZRPS

Fighter ZRPS

8 zones and 8 relays expansion panel with PSU
Connects to the fighter panel via 4-wires RS-485 BUS. Module ID via Dip Switches. Power supply 27.6 VDC, 2A. CE certified.
more
Fighter ZPS

Fighter ZPS

8 zones expansion panel with PSU
Connects to the fighter panel via 4-wires RS-485 BUS. Module ID via Dip Switches. Power supply 27.6 VDC, 2A. CE certified.
more
Fighter EKZ

Fighter EKZ

8 zones expansion module with keypad
Connection via BUS. Module ID via Dip Switches. Powered from the BUS. CE certified.
more
Fighter EKR

Fighter EKR

8 relays expansion module with keypad
Connection via BUS. Module ID via Dip Switches. Powered from the BUS. CE certified.
more
Fighter EXZ

Fighter EXZ

8 zones expansion module without keypad
Connection via BUS. Module ID via Dip Switches. Powered from the BUS. CE certified.
more
EXR

Fighter EXR

8 relays expansion module without keypad
Connection via BUS. Module ID via Dip Switches. Powered from the BUS. CE certified.
more
Fighter KSDA

Fighter KSDA

LCD remote keypad
User friendly Alphanumeric keypad - repeater. Menu-driven programming for easy system setup (installer). Easy user information and system status with clever filtering through 4 buttons. Filtering alarms, faults, bypasses and log events creates easy to comprehend uncluttered display screens.
more
EXP Z8

EXP Z8

PCB expansion module with 8 zone inputs
All inputs are fully supervised and must be properly terminated. Capability for extra Power Supply (FPS-5, transformer and batteries) with fully supervised mains and battery inputs. Each zone input (main panel or expansion modules) supports up to 20 detectors (160 detectors max). Connection via BUS. Module ID via Dip Switches.
more
EXP R8

EXP R8

PCB expansion module with 8 relays
All outputs are supervised and must be properly terminated. 24VDC/1A output per relay (fused). Maximum load depends on rest of system. Capability for extra Power Supply (FPS-5, transformer and batteries) with fully supervised mains and battery inputs. Provides the ability to connect a wide variety of loads (notification appliances, automation modules etc). Connection via BUS. Module ID via Dip Switches.
more
FPS-5

FPS-5

Switching stabilized power supply
Switching stabilized power supply 27,6 VDC - 2A without transformer (PCB board only). When connected to the fighter main board provides mains supervision, battery charger, battery health monitor (high internal impedance detection) and short circuit protection for the battery charger. CE certified.
more
FRTCP-IP

FRTCP-IP

Communication Module TCP/IP - RS232
FRTCP-IP module connects directly with Fighter panel’s main board (LAN-RS232 connector). FRTCP-IP gives the ability to access and control the Fighter fire alarm panel, locally through the RS232 port or remotely through the ethernet / internet (TCP/IP) in real time with the use of the specially designed Fighter ProVision software. Programming of the FRTCP-IP module’s communication parameters is performed through the Fighter panel’s keypad.
more
Emporium - distribuitor exclusiv PARADOX2 ani garantieEmporium - distribuitor exclusiv al Paradox Security Systems - in Romania